BMW S38 Straight-6 engine
From 1986 to 1996
The BMW S38 is a straight-6 DOHC piston engine which replaced the M88 and was produced from 1986-1996. It is based on the M88/3 engine.
This engine is similar to the M30, but has a 24-valve cylinder head, duplex timing chain, dual overhead cam layout and shim and bucket style valvetrain In addition to the top end revisions, the S38 also had six individual throttle bodies and intake trumpets fed by a cast aluminum intake plenum.
The BMW S38 is a DOHC - series - six-cylinder - petrol engine in four-valve technology with manifold injection engine manufacturer BMW or the associated BMW M GmbH , which was presented 1988th The two overhead camshafts are driven by a duplex chain . The mixture is supplied separately for each cylinder via its own intake manifold and one throttle per cylinder ( single throttle system ). This came in the M5 E34 used. Its origin is the engine in the BMW M30 with whom he does not have much in common, however, and is the successor and close relative of the also based on the M30 BMW M88 which was first installed in the BMW M1 .
The peculiarity of the S38 is compared to other BMW six-cylinder engines in addition to the four-valve technology in the then used only in racing single throttle valve system , which provides in conjunction with the electronic engine control for better cylinder filling and better response. An electrically adjustable flap in the air collector, which causes the same effects as a variable intake manifold, was reflected in a better power delivery in the lower rpm range.
Both engines were designed from the outset to meet all of the world's existing legal emission standards at the time. So you put different catalysts, which were made of metal or ceramic depending on the engine version. Only in a few states (for example South Africa), where unleaded petrol was not yet fully established, was this technology abandoned.
The engine was developed and built, just like the corresponding vehicle, at BMW M GmbH .
Offered this engine was only with manual transmission, first with a 5-speed gearbox and from May 1994 with a 6-speed gearbox manufacturer Getrag.
In the BMW E28 M5 for the US market a version of the M88 / 3 engine was installed, which was equipped with a catalyst and at constant 3453 cm 3 engine capacity 191 kW makes; This M88 / 3 engine is already referred to as S38B35 and was built from 1984 to 1989.
The S38 is an evolution of the M30 derived engine BMW M88 . Both the M88 and the first version of the S38 (S38B36) have a displacement of (rounded) 3.5 liters. An increase to 3.8 liters (S38B38) was achieved by a larger bore and a new forged crankshaft , which raised the stroke from 86 to 90 mm. Furthermore, the inlet valves were enlarged and the air filter housing flow optimized. Another innovation with the S38B38 is the distributorless ignition, which has six individual ignition coils. The S38B38 engine weighs 236.8 kg.
Models
| Engine | Displacement | Power | Torque | Bore | Stroke | Year | Application |
|---|---|---|---|---|---|---|---|
| S38B35 | 3,453 cc (211 cu in) | 252 hp (188 kW) @ 6500 rpm | 330 N·m (243 lb·ft) @ 4500 rpm | 93.4 mm (3.7 in) | 84 mm (3.3 in) | 1986–1988 | BMW E28 M5 (NA spec), BMW M6 (NA spec), BMW M635CSi with catalytic converter |
| S38B36 | 3,535 cc (216 cu in) | 315 hp (235 kW) @ 6900 rpm | 360 N·m (266 lb·ft) @ 4750 rpm | 93.4 mm (3.7 in) | 86 mm (3.4 in) | 1989–1993 | BMW E34 M5 (NA spec) and Euro spec 1989–1992 |
| S38B38 | 3,795 cc (232 cu in) | 340 hp (250 kW) @ 6900 rpm | 400 N·m (295 lb·ft) @ 4750 rpm | 94.6 mm (3.7 in) | 90 mm (3.5 in) | 1992–1996 | BMW E34 M5 |
S38B35
The S38B35 was based on the M88/3, but with changes including a dual-row timing chain, camshaft, compression ratio lowered to 9.8:1 and fitted with a catalytic converter.
Applications:
- 1984-1988 BMW M5 (E28) sedan
- 1986-1989 E24 BMW M6 coupe
- 1987-1989 E24 M635CSi coupe
S38B36
For the S38B36 displacement was enlarged from 3453 to 3535 cc, achieved by increasing the stroke from 84mm to 86mm by using a longer forged steel crankshaft. Different camshafts were also used and the compression ratio was increased to 10:1. A variable-length inlet manifold was used claimed to improve torque output, equal length stainless steel exhaust headers remains.The fuel injection system was Bosch Motronic.
Applications:
- 1988-1993 E34 M5 sedan
S38B38
In 1992, BMW further enlarged the S38 engine to 3795 cc, with power climbing to 250 kW (340 hp) and torque increasing to 400 N·m (300 lb·ft). Coil-on-plug ignition replaced the traditional distributor which was used on previous S38 engines and the Bosch Motronic 3.3 fuel injection system was used. Other upgrades include:
- The resonance flap now is controlled by the DME.
- Also gains a new spot on the power curve for the above, at 2,480 rpm (the other two being at 4,120 rpm and 6,720 rpm)
- Thus it develops ~ 80% of its total torque from just ~ 1,800 rpm.
- A new dual mass flywheel that acts like a harmonic balancer.
- New design for the front crankshaft damper with four stretch bolts which are fastened with three phases.
- The compression ratio has been raised from 10.0:1 to 10.5:1
- The exhaust manifold specially developed from a high grade superalloy family, named inconel that is used in extreme environments and high temperature applications such as Formula One and NASCAR exhaust systems and space shuttle programs.
This engine was used in the E34 M5 until finished production in 1996.
Applications:
- 1992-1996 European-spec BMW M5 (E34)
