Mitsubishi 3A9 engine
Mitsubishi 3A9 engine, this is a in-line 3-cylinder gasoline engines from Mitsubishi Motors from 2003 on .
History
The Mitsubishi 3A9 engine is a small in-line 3-cylinder petrol engine with Displacement of 1.0L ,1.1L and 1.2L built from 2003 on. Fitted depending on location in the Mitsubishi Mirage, Colt, Attrage and also the Mercedes Smart Forfour.
Developed in 2003 at the same time as the 4A9, the 3A91 type was first installed in the European specification Colt this was the only variation until 2011.
From 2012, the 3A90 and 3A92 will be installed on the Mirage. The technical characteristics are almost the same as the 4A9, but MIVEC is not adopted except for the 3A90 and 3A92 for the 6th generation Mirage. Previously, like the 4A9, it was manufactured by Daimler 's subsidiary MDC Power GmbH in Germany, but now it is manufactured at the Powertrain Factory in Kyoto City. The engine type in Mercedes-Benz of the 3A91 type is M134.
3A90 MIVEC is a phase change type (intake side only). The intake closing timing at the most retarded MIVEC is set to some extent late, and the late closing reduces pumping loss and operates in a manner similar to a late closing mirror cycle at light loads, contributing to improved fuel efficiency.
Mitsubishi 3A9 engine Variations Technical details and specifications
3A91 (2003 to 2007)
- Type: DOHC 12 valve
- Fuel type - Petrol (gasoline)
- 3-cylinder
- Firing order 1-3-2
- Displacement: 1,124cc
- Bore pitch: 83.0mm
- Bore: 75.0mm
- Stroke: 84.8mm
- Compression ratio: 10.5:1
- Air metering Type Mass
- Maximum output: 55kW (75PS) / 6,000rpm
- Maximum torque: 100N m (73 ft lbf) / 3,500 rpm
Installed vehicle
- 2003 -Mitsubishi Colt (European spec)
- 2004-2006 Smart Forfour
3A90 (2012-)
- Type: DOHC 12 valve MIVEC
- Fuel type - Petrol (gasoline)
- 3-cylinder
- Firing order 1-3-2
- Displacement: 999cc
- Bore pitch: 83.0mm
- Bore: 75.0mm
- Stroke: 75.4mm
- Compression ratio: 10.5:1
- Air metering Type Mass
- Maximum output: 51kW (69PS) / 6,000rpm
- Maximum torque: 86N m (8.8 kgf m) / 5,000 rpm
Installed vehicle
- 2012 -Mitsubishi Mirage (6th generation)
3A92 (2012-)
- Type: DOHC 12 valve MIVEC
- Fuel type - Petrol (gasoline)
- 3-cylinder
- Firing order 1-3-2
- Displacement: 1,193cc
- Bore pitch: 83.0mm
- Bore: 75.0mm
- Stroke: 90mm
- Compression ratio: 10.5:1
- Air metering Type Mass
- Maximum output: 57kW (78PS) / 6,000rpm
- Maximum torque: 100N m (73 ft lbf) / 4,000 rpm
Installed vehicle
- 2012- Mitsubishi Mirage (Overseas specifications)
- 2013 -Mitsubishi Attrage (Thai spec)
- 2014 -Mitsubishi Mirage G4 (Philippine spec), Mitsubishi Mirage (Japan spec/1.2G)
Technical
-
Mitsubishi 3A9 engine Technical details and specifications (2003-)
Engine Type 3A91 Capacity 1124 cc
No. of cylinders 3/DOHC
Capacity 1124 cc
Compression ratio 10,5:1
Type: DOHC 12 valve
Bore: 75.0mm
Stroke: 84.8mm
Bore pitch: 83.0mm
Firing order 1-3-2
Suitable for unleaded petrol Yes
Ignition system Map-DIS
Trigger location Cam/ Crankshaft
Fuel System MFI-s Combined ignition and fuel ECM Yes
Air metering Type Mass
Oil pressure 2,9-6,9 bar @ 3500 rpm
Fuel system pressure with vacuum 3,2 bar
Engine coolant temperature 80 °C
Thermostat opens 82±2 °C
Injector 14-15 Ohm
Maximum cranking amps 113-139A© Motor car History