About
Technical
-
Engine: 660 cc
centre/rear longitudinal mounting, in front of rear axle
3 cylinders inline
Bore 66 mm Stroke 64 mm
Displacement 656 cm'
Compression ratio: 9,8:1
Cast iron block and light alloy head
4 valves per cylinder, overhead
1 overhead camshaft (toothed belt)
Lubrication: pressurized
Oil filter: full-flow, cartridge type
Fuel system: carburettor
Manual choke
Paper type air filter (cartridge)
Electronic ignition
Pressurized liquid cooling,sealed circuit
3-way catalyst (1987 Japanese standards)
Alternator 35 A
Battery 32 Ah.Transmission:
rear wheel drive
single plate clutch, cable actuated
Gearbox: mechanical, in line with cylinder block
5 speed, synchromesh: 1st) 2nd) 3rd) 4th) 5th) 0,911:1; R) 4,3:1
Final drive: bevel gear with ratioActy Street 4WD
Transmission: part-time 4-wheel drive
5th gear ratio 0,941
Final drive: spur gear (front) and bevel gear (rear) with ratio 3,272:1 and 6,23:1.Chassis/body:
5-door minibus
steel sheet body
4 seats
Unitary body
steel sheet
Suspension:
Front suspension: independent wheels, MacPherson strut with transverse arm and oblique beam, coil spring
Rear suspension: rigid axle, longitudinal leaf spring - Hydraulic shock absorbersBrakes:
front discs
rear drumsSteering
Rack and pinion steering
Turning diameter 7,6 mDimensions and weights:
wheelbase 1,9 m
Length 3,295 m
Width 1,395 m
Height 1,87 m
Ground clearance 19,5 cm
Turning diameter 7,6 m
Kerb weight 830 kg (810 kg: G, L).
Tyres: 145/80 SR 12.
Fuel tank 371.
ModelsConstruction year
model code
variant
capacity
kW ( PS )
1988-1990
HA1
platform
547 cm 3
25 (34)
Japan
E05A
HA2
E05A, all-wheel drive
HH1
Delivery van, bus
E05A
HH2
E05A, all-wheel drive
Facelift 1990 Models
Construction year
model code
variant
capacity
kW ( PS )
1990-1999
HA3
platform
656 cm 3
28 (38)
from 1996: PGM-FI
(32 kW (44 hp))
Japan
E07A
HA4
platform
E07A, four-wheel drive
HH3
Delivery van, bus
E07A
HH4
Delivery van, bus
E07A, four-wheel drive
1995-1999
HA5
crawler
E07A, chain drive
Note:
All engines and full specifications available for registered users© Motor-car.net
Manuals
Honda Acty 2nd Generation
|
|
|
|
Production period: |
1988-1999 |
|
Class: |
Commercial vehicle |
|
designs: |
Flatbed , panel van ,minibus |
|
Engines: |
Gasoline : 0.55-0.66 litres |
In 1988, the Acty appeared in 2nd generation models HA1, HA2, HH1, HH2, HA3, HA4, HA5, HH3, HH4 now larger vehicle length. This Honda responded to the already changed in 1984 rules for Kei Cars. The engine was again redeveloped and now had three instead of two cylinders. Also, a new version of Honda Street was available again.
The Acty has been thoroughly redesigned because the 1988 model has not fully exhausted the cubic capacity and vehicle length limitations. From the year 1990, the Acty was equipped with a new engine (E07A). A 3-cylinder four-stroke engine with 656 cm 3 . This engine was used in all Honda Kei cars of that time.
Performance:
Max power 27,9 kW (38 hp) at 5300 rpm
Max torque 54 Nm (5,5 kgm) at 4500 rpm (JIS standards)
Specific power 42,5 kW/litre (57,9 hp/litre)
max speed 115 km/h in 5th gear.
A new model, the Acty Crawler, supplemented the program in 1995. This version not only had caterpillar drive on a tandem rear axle, but was also a tipper at the same time.
In 1996, the tried-and-tested E07A engine was equipped with PGM-FI gasoline injection, resulting in a power increase from 28 kW (38 hp) to 32 kW (44 hp). Technically, the models remained unchanged.
|
Featured
|
|
